北京彩票中心的电话

Hello, welcome to ventilation ventilation building - ventilation skylight - Shandong DUKAI ventilation equipment Co., Ltd. website!

 Logo
Thirteen billion two hundred and ninety million two hundred and sixty-six thousand six hundred and sixteen

Current location: homepage > News and information > Company news >

Model description and attention factors of ventilated air tower

Time: 2019-10-26 09:40 Browse times: Source: Shandong DUKAI Ventilating Equipment Co., Ltd.

With the increasing number of buildings, ventilation and air towers may be strange and familiar to people's lives. It is a natural ventilation system, which turns indoor and outdoor heat into power and dispels indoor air pollution. So, do you know what kind of information is there for ventilation buildings? What problems should we pay attention to? Next we will give a detailed understanding of the "air ventilation building model description and attention factors".

 

 

Model selection and maintenance of ventilated air tower

 

1, inspect the comprehensive strength of manufacturers. We can inspect the rooftop ventilated air tower manufacturers and go to their factories to see their factory area, the number of workers, the number of equipment, and so on. We can see that the roof ventilating and air building manufacturers can have enough capacity to undertake large-scale projects, and the general strength of the manufacturers that can undertake large projects will not be bad.

 

2, carefully observe the manufacturer's products. The roof ventilating and air building manufacturers can also see the ventilated air building products produced by the manufacturers, analyze them from the details, and see if the manufacturers can properly handle the roof ventilated air towers in details.

 

 

3, look at engineering cases. We can investigate and investigate the completed works of the ventilated building on the roof to see if there are any problems in the follow-up operation, or what kind of problems are there. In addition, you can also consult workers in the factory area where you have done the project, and see how you can use your experience to help you make your own judgement.

 

Of course, there are many ways and means to optimize the roof ventilating and air building manufacturers. Different owners may have different requirements for ventilation and air tower products, and need specific analysis. But generally speaking, roof ventilation and air tower optimization can refer to the three points mentioned above.

 

Ventilated air tower is a very good ventilation equipment. Its appearance can improve people's health and live in a more comfortable environment, which reflects the importance of ventilation and air building. Therefore, the maintenance of ventilation buildings is very important. Next we will know how to maintain the ventilator building's specific needs.

 

Ventilated air tower manufacturers continue to work for a month or so. If ventilating and air building manufacturers run continuously for 3 months to half a year, it is necessary to change the grease once to fill the bearing space 2/3. Ventilated air tower manufacturers need regular maintenance to eliminate dust and dirt inside the fan. During the start-up, shutdown or operation of ventilated building, if the abnormal environment is invented, temperature, vibration and noise should be inspected immediately.

 

As the ventilated air tower is made up of various professional components, its maintenance has also become a very professional technical work. As we all know, any mechanical and electrical equipment, like human beings, can not avoid the aging phenomenon caused by long-term use, and regular maintenance will be able to use its life, so that ventilating and air building manufacturers always run in the state, thereby improving the use value of fixed assets, so the importance of regular maintenance for ventilation and air building manufacturers is gradually being recognized.

 

In the process of ventilation, whether the ventilation building can operate normally, besides the product quality, installation level and proper operation, another main factor is the maintenance in the process of use. At present, most users are in line with the traditional concept of "installation (purchase), life-long use", and the trouble of finding a factory is not too late. This has delayed the use and increased maintenance costs. Therefore, strengthening the periodic maintenance and cleaning of ventilated air towers can prevent and reduce the occurrence of failures, and the service life of products, so that ventilation buildings are in good working condition.

 

 

Construction features and matters needing attention of ventilated building

 

Ventilated air tower is a natural ventilation system, which uses indoor and outdoor temperature difference as a driving force, inhaling fresh air at low places, and ventilating the top of the building to disperse indoor air pollution, which has many advantages over the power fan.

 

Ventilation buildings are now widely used in building roofs of chemical, electronic and power metallurgy industries.

 

 

Construction characteristics of ventilated air tower

 

1. the entire ventilation building is parallel to the roof to reduce wind pressure and typhoon attack.

 

2. the ventilated air tower is composed of main skeleton and secondary skeleton, which is convenient for transportation and installation.

 

3. the main skeleton and secondary skeleton steel structure is easy to manufacture, and the existing workshop can be constructed immediately.

 

4. lighting and ventilation integrated molding, low cost and good fruit;

 

5. built in gutter, beautiful appearance, integrity.

 

Construction process and matters needing attention of ventilated air tower

 

Phase I preparation and requirements

 

According to the construction schedule of the site, transport the planned materials to the site 2~3 days in advance, so as to ensure the smooth construction of the project.

 

All materials are classified and stacked according to the characteristics of the materials after being transported to the construction site.

 

1) skeleton

 

The skeleton is directly stacked on the smooth ground, and it is isolated from the ground between the skeleton and the ground. It has been prevented from being contaminated by mud.

 

2) enclosure plate

 

The enclosure plate is made of thin steel sheet * *, which has the characteristics of fear of folding and pollution. Therefore, its stacking should be on the flat floor, and it will be separated from the ground by using wood and wood. At the same time, the plate should be stacked up and down, so as to facilitate the emission of condensed water in the board. The stacking site should be far away from the steel processing area of the construction site to prevent the iron spatter from being spatter away, resulting in rust on the surface of the sheet.

 

3) accessory

 

All the fittings used in engineering such as bolts, self tapping, glue, silica gel and so on are classified and stacked in accordance with specifications and specifications and temporary warehouse in the construction site.

 

The above is about the introduction of "model selection and maintenance of ventilated air tower" and the construction features and matters needing attention of ventilation and air building, hoping to help you understand the "ventilated air tower".

Last article: How can the ventilator eliminate harmful gases in the workshop?

Next article: Basic knowledge and unique performance advantages of roof blower

Related articles
Recommended products
十一选五北京地走势图带连线 北京彩票中心的电话 北京11选5网上投注 凤凰vip彩票提现不了 北京pk赛车10计划精准版 凤凰彩票怎样解绑银行卡 内蒙快三 刷彩票漏洞是真的吗 凤凰城棋牌真的吗 十一选五推荐预测